priv_ata_pio.h File Reference

#include "types.h"
#include "utils/native.h"
#include "managers.h"
#include "drivers.h"

Include dependency graph for priv_ata_pio.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	IDE_CTRL_A_BASE   0x1F0
#define	IDE_CTRL_B_BASE   0x170
#define	IDE_MASTER   0xA0
#define	IDE_SLAVE   0xB0
#define	STATUS_BUSY   0x80
#define	STATUS_DRQ   0x08
#define	STATUS_ERR   0x01
#define	DATA_PORT(x)   ((x+0))
#define	FEAT_ERR_PORT(x)   ((x+1))
#define	SECTOR_COUNT_PORT(x)   ((x+2))
#define	LBA_LO_PORT(x)   ((x+3))
#define	LBA_MID_PORT(x)   ((x+4))
#define	LBA_HI_PORT(x)   ((x+5))
#define	DRIVE_PORT(x)   ((x+6))
#define	CMD_REG_STATUS_PORT(x)   ((x+7))
#define	SPECIAL_STATUS_PORT(x)   (x + 0x206)
#define	DRIVE_DIAG_CMD   0x90
#define	FORMAT_TRACK_CMD   0x50
#define	IDENTIFY_DRIVE_CMD   0xEC
#define	INITIALIZE_DRIVE_CMD   0x91
#define	NOP_CMD   0x00
#define	READ_BUFFER_CMD   0xE4
#define	READ_BUFFER_DMA_R_CMD   0xC8
#define	READ_BUFFER_DMA_CMD   0xC9
#define	READ_LONG_R_CMD   0x22
#define	READ_LONG_CMD   0x23
#define	READ_MULTIPLE_CMD   0xC4
#define	READ_SECTORS_R_CMD   0x20
#define	READ_SECTORS_CMD   0x21
#define	READ_SECTORS_EXT   0x24
#define	READ_VER_SECTORS_R_CMD   0x40
#define	READ_VER_SECTORS_CMD   0x41
#define	RECALIBRATE_CMD   0x10
#define	SEEK_CMD   0x70
#define	SET_FEATURES_CMD   0xEF
#define	SET_MULTIPLE_MODE_CMD   0xC6
#define	WRITE_BUFFER_CMD   0xE8
#define	WRITE_DMA_R_CMD   0xCA
#define	WRITE_DMA_CMD   0xCB
#define	WRITE_LONG_R_CMD   0x32
#define	WRITE_LONG_CMD   0x33
#define	WRITE_SECTORS_EXT   0x34
#define	WRITE_MULTIPLE_CMD   0xC5
#define	WRITE_SAME_CMD   0xE9
#define	WRITE_SECTORS_R_CMD   0x30
#define	WRITE_SECTORS_CMD   0x31
#define	WRITE_VERIFY_CMD   0x3C
#define	CHECK_PWR_MODE_CMD   0x98
#define	IDLE_CMD   0x97
#define	IDLE_IMM_CMD   0x95
#define	SLEEP_CMD   0x99
#define	STANDBY_CMD   0x96
#define	STANDBY_IMM_CMD   0x94

Macro Definition Documentation

#define CHECK_PWR_MODE_CMD   0x98

#define CMD_REG_STATUS_PORT

(

x

)

((x+7))

#define DATA_PORT

(

x

)

((x+0))

#define DRIVE_DIAG_CMD   0x90

#define DRIVE_PORT

(

x

)

((x+6))

#define FEAT_ERR_PORT

(

x

)

((x+1))

#define FORMAT_TRACK_CMD   0x50

#define IDE_CTRL_A_BASE   0x1F0

#define IDE_CTRL_B_BASE   0x170

#define IDE_MASTER   0xA0

#define IDE_SLAVE   0xB0

#define IDENTIFY_DRIVE_CMD   0xEC

#define IDLE_CMD   0x97

#define IDLE_IMM_CMD   0x95

#define INITIALIZE_DRIVE_CMD   0x91

#define LBA_HI_PORT

(

x

)

((x+5))

#define LBA_LO_PORT

(

x

)

((x+3))

#define LBA_MID_PORT

(

x

)

((x+4))

#define NOP_CMD   0x00

#define READ_BUFFER_CMD   0xE4

#define READ_BUFFER_DMA_CMD   0xC9

#define READ_BUFFER_DMA_R_CMD   0xC8

#define READ_LONG_CMD   0x23

#define READ_LONG_R_CMD   0x22

#define READ_MULTIPLE_CMD   0xC4

#define READ_SECTORS_CMD   0x21

#define READ_SECTORS_EXT   0x24

#define READ_SECTORS_R_CMD   0x20

#define READ_VER_SECTORS_CMD   0x41

#define READ_VER_SECTORS_R_CMD   0x40

#define RECALIBRATE_CMD   0x10

#define SECTOR_COUNT_PORT

(

x

)

((x+2))

#define SEEK_CMD   0x70

#define SET_FEATURES_CMD   0xEF

#define SET_MULTIPLE_MODE_CMD   0xC6

#define SLEEP_CMD   0x99

#define SPECIAL_STATUS_PORT

(

x

)

(x + 0x206)

#define STANDBY_CMD   0x96

#define STANDBY_IMM_CMD   0x94

#define STATUS_BUSY   0x80

#define STATUS_DRQ   0x08

#define STATUS_ERR   0x01

#define WRITE_BUFFER_CMD   0xE8

#define WRITE_DMA_CMD   0xCB

#define WRITE_DMA_R_CMD   0xCA

#define WRITE_LONG_CMD   0x33

#define WRITE_LONG_R_CMD   0x32

#define WRITE_MULTIPLE_CMD   0xC5

#define WRITE_SAME_CMD   0xE9

#define WRITE_SECTORS_CMD   0x31

#define WRITE_SECTORS_EXT   0x34

#define WRITE_SECTORS_R_CMD   0x30

#define WRITE_VERIFY_CMD   0x3C